Corner Fireplace Makeover

There was nothing redeeming about the house I bought when I was single, and still own today, save for the walk-in closets in the bedrooms (what shoe-loving girl wouldn’t love that)!

Once of the worst features was the fireplace. Don’t you just hate corner fireplaces? I don’t understand why builders install them. Here’s how our fireplace looked before we bought the house:

Corner Fireplace Makeover_6_bof.jpg

One day when I was at work, hubs enlisted a friend to make it over. They started by busting out the hearth. Luckily the former owner had left a box of tiles for just such an occasion.


As you can see from the picture above, the brick is just awful; the builder used the same rough brick that was on the exterior of the house.  To combat the lint trap, we refaced the brick with cement board to smooth it out.

Corner Fireplace Makeover 101_bof.jpg

Since the brick was so uneven, shims and cement were used to fill the gaps and provide a level surface for the cement board. The board was set into the wet cement and then screwed into the brick with masonry screws to hold it securely.

Corner Fireplace Makeover 100_bof.jpg

Hubs and his friend did a beautiful job of skim coating over the entire surface after the board was up but forgot about the tape. It’s not necessary to skim coat the whole surface, but don’t be tempted to skip the tape and mud because the seams will crack and ruin your final finish.  I only discovered that little known fact about the missing tape a few weeks later when my beautifully applied venetian plaster developed cracks! I had to tape over the seams and start the whole mudding and finishing process all over again. I guess that’s what happens when a women isn’t there to supervise 🙂

Moving right along, I tackled the disgusting firebox which was covered with years of soot. I started off with soap and water, but had to resort to a chemical cleaner. It was better after scrubbing but still showed the telltale signs of neglect.

Corner Fireplace Makeover 097_bof.jpg

Right after that is when I applied the venetian plaster – the first time!



After a few layers, letting it dry in between, I then sanded it to a smooth lustrous finish:corner-fireplace-makeover-122_bof

Now I had to tackle patching the floor tile.


Demolition is my favourite part; I smashed out areas of half tile so I could add full pieces back in.

Corner Fireplace Makeover 137_bof.jpg

Once the area was cleaned of debris, I started the process of re-tiling. I built the underlay up to the same height as the rest of the floor by inserting a piece of leftover cement board over the plywood.

Corner Fireplace Makeover 161_bof.jpg

I filled in the field tiles.


As I measured the ones that had to be cut, hubs cut those for me as I went.


I let the thinset dry for a day. The picture below is just before I grouted the tile.


You couldn’t even tell the floor was repaired after it was grouted!

Here’s how the fireplace looked for a few years before we got tired of it and moved onto phase II of our makeover:

Fireplace Makeover 1_bof.jpg

The room was ok for a few years, but it was repainted and redecorated to make it more bright and airy! A custom made sisal area rug was cut to the shape of the room to hide the majority of the original ’80’s tile floor, leaving just enough of a border around it so you can still see my tile repair work 🙂


Here’s another reminder of the before:

Corner Fireplace Makeover 023_bof.jpg

Now, it’s so cozy at night when it’s lit:

Fireplace Reveal 008_bof.jpg

The installation of a new gas fireplace is a welcome addition for the warmth (and now I don’t have to look at soot residue either)!

Corner Fireplace Makeover 270_bof.jpg

Looking back on pictures of how the house looked when I first bought it, it has come such a long way. I’m sure the previous owner wouldn’t even recognize it now.

Like so many of our other updates, cosmetic changes can have a big impact.Covering up the ugly brick took the fireplace from dated to modern and was well worth the effort!


For more home improvement and DIY ideas, check out the home page for a listing of projects.

You might also be interested in my new craft blog where I just posted a tutorial and video for this remote control holder I made hubs for his mancave. You can find it here.

Remote Control Cadd y 005_bof.jpg

If you enjoyed this post, please pin and share. Follow us either on Bloglovin’ or right here at Birdz of Feather and you’ll get an e-mail whenever we post.

Bloglovin Button

Featured on




6 thoughts on “Corner Fireplace Makeover

  1. Pingback: Industrial Remote Control Holder | Birdz of a Feather Craft

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s